BreathableBaby Breathable Mesh Crib Liner Review

Baby crib with plush toys for infant play and napping

Every parent wants what’s best for their infants, so knowledge of new ways of protecting them is important. Over the years, cases of infant death or injury have enabled researchers to develop new ways of ensuring the safety of children.

In the case of protective parents, wooden slats on a child’s bed can seem like a danger. For instance, the kid could bang their head on the wood, or their leg or arm could get stuck between the slats.

A parent could use a breathable mesh crib liner from Breathable Baby to avoid all this. The crib liner surrounds the inner sides of a kid’s bed, protecting them from any harm.

BreathableBaby Breathable Mesh Crib Liner Review

After long research periods, Breathable Baby came up with an incredibly breathable mesh liner. Children’s safety was the main drive while creating these mesh liners. You can forget about your baby’s arm or leg being stuck between the wood slats after getting this mesh liner.

Padded bumpers have been known to cause restricted airflow for children in the past. That is why mesh liners were made with air circulation in mind. As a result, both parents and caregivers can rest easy knowing their kids are safe with breathable mesh liners.

Who Is This Product For?

Breathable mesh liners are used to protect kids from injuring themselves on the wooden slats on their cribs. Kids tend to roll on their beds, making them vulnerable to injury or suffocation.

What’s Included

Once you buy this product in the box, you will only get the Breathable Baby classic breathable mesh crib liner. That is for the solid-end crib.

Overview of Features

Breathable Baby has gone above and beyond to ensure kids’ safety comes first, and that is why the breathable mesh liners have been tested. A third-party laboratory that has been accredited oversaw the testing and approved the mesh liners. That is why this product has been successful since 2002.

The mesh liners are easy to adjust to fit your kid’s crib. They even come with installation instructions. If you don’t know how to fit it into the crib, contact customer service for a step-by-step guide on how you can do this.

It must be tightly pulled, with the first bottom edge fitted on the mattress top. Try using the Deluxe mesh liner if the other liners are not taut enough.

Mesh liners are different from padded bumpers since they have been made with air circulation in mind. In addition, they have a visual shield to enable your kid to have a night of uninterrupted sleep. Also, you don’t have to worry about a pacifier falling out since it’s well within reach.

There are three types of protection to cater to every individual need:

  • Deluxe – brings you both style and function
  • Essential Airflow Baby – for your basic function
  • Classic – for optimum yield

The breathable mesh fits solid back cribs, full size, and four-sided slatted cribs: One short panel 11” H x 82” L (28cm x 208cm) and one long panel 11” H x 111” L (28cm x 282cm). The breathable mesh is designed with a no-gap wrap that ensures full coverage and zero gaps in the cribs. However, the breathable mesh doesn’t fit cribs that have changing tables attached to them.

A single layer of classic mesh makes up the breathable mesh. It is constructed with 3mm thick air channel technology to ensure its tightly fitted to the crib’s sides. The ability to block light was also considered while making the breathable mesh. A polyester trim is also added at the top and bottom parts. It is important to note that this polyester has no formaldehyde, flame retardants, or harmful chemicals.

How to Use It

Properly installing a breathable mesh is key to its effectiveness. Here is a simple way of installing it:

  • Put the panels along the insides of the crib, covering the front and back. The large hole mesh should face the inside.
  • Ensure the ties to the mesh are upwards and outside the crib.
  • Fasten the wraps around the slats on the back and front parts of the crib. Please, ensure they are secure and pull the liner tightly to prevent any sagging.

Pros

  • Prevents head concussions
  • It eases a parent’s mind
  • Easy to manage
  • Protects other body parts

Cons

  • Can cause crib clutter

Alternatives

If the Breathable Baby Breathable Mesh Crib Liner is way above your budget, you can still opt for a different product but is closely related. Let’s see what choices you have.

Graco Benton 4-in-1 Convertible Crib

This is a 4-inch mattress that you can easily convert to a daybed. The best thing about this alternative is that you can adjust the mattress height to suit a full-sized bed. In addition, the universal design of this crib makes it highly convenient for anyone. However, it is important to note that the size conversion kit for this crib is sold separately.

The rail covers prevent children from teething on the rails. You will love to know that it is JPMA-certified since it has been tested and approved by different laboratories. It meets all the necessary standards to keep your kid safe throughout the night.

The bed weighs around 42 pounds and measures 29.72 x 55.73 x 41.68 inches. The maximum height you can get of the same is 35 inches. However, there are also three various height options. It’s a worthwhile investment.

Conclusion

There is nothing more important than your child’s safety when you are a parent. Having the right equipment to enhance their safety is essential. This is the main reason why having a breathable mesh liner on your baby’s crib is essential.

Breathable mesh crib liners from Breathable Baby are among the best on the market. They have all the necessary features to ensure your kid’s safety while sleeping. After getting a breathable mesh liner, you no longer have to have a restless night.

Hopefully, this review will help you while you consider the right method for preventing your child from hurting themselves during nap time.

>